Bearing the load: The small components supporting datacentre automation

Datacentres depend on a wide range of components, from servers and cooling systems to smaller mechanical parts such as bearings that support moving equipment. As inspection robots, automated monitoring systems and mobile monitoring platforms witness growing deployment, bearing specification is becoming increasingly important to equipment reliability. Here, Chris Johnson, Managing Director at specialist bearing supplier SMB Bearings, sets out why miniature and thin-section bearings have a growing role in datacentre reliability.

The increasing use of automation is adding a new layer of moving parts to datacentres, which already depend on continuous mechanical motion in cooling and air-handling systems. Inspection robots and automated monitoring equipment introduce bearings, joints and drive components that must operate reliably over long periods. As automation becomes more widespread, the reliability of these individual components becomes increasingly important.

Why more robotics means more moving parts

Traditional datacentre infrastructure already depends on numerous rotating components. Cooling fans operate continuously, pumps circulate coolant and air-handling equipment relies on precise mechanical motion. Robotics adds further movement, often involving compact motors, articulated joints, drive wheels and positioning systems.

These applications frequently require miniature, thin-section or instrument bearings rather than standard industrial bearings. Although physically small, they can have a significant influence on the performance of the equipment they support.

Recent research into autonomous data centre inspection robots demonstrates the potential scale of these systems. A 2026 study published in the International Journal of Advanced Robotic Systems reported that an autonomous robot system deployed across multiple datacentres improved inspection efficiency by more than 50%, completed over 10,000 km of autonomous patrols and identified more than 1,200 equipment anomalies.

A failed bearing in an inspection robot might not bring down an entire facility, but it can remove an important monitoring function, require unplanned maintenance and create gaps in inspection coverage that operators seek to minimise.

Where bearings come in

Robots can improve efficiency, productivity and monitoring capability, but each also introduces additional bearings and drive components that can become potential sources of failure. The more automated a datacentre becomes, the more these small components matter.

Miniature ball bearings support servomotors and actuators, while thin-section bearings can see use in rotary joints where space and weight are limited. An unsuitable bearing specification can result in excessive wear or mechanical failure. A stalled joint or seized actuator, for example, could take a robot out of service.

The same considerations apply to environmental control equipment. Fans, pumps and air-handling systems depend on bearings that may need to operate over long service intervals, making bearing life an important factor during specification.

Precision bearings also find use in pan-tilt-zoom cameras, automated inspection devices and LiDAR-based monitoring systems. Sealed and corrosion-resistant designs can help protect against dust, humidity and other contaminants. As automated systems reduce the need for manual inspection, the number of precision bearings operating across a data centre can increase considerably.

Getting the specification right

Specifying the wrong bearing can have consequences beyond the component itself. Excess friction can accelerate wear, generate heat and eventually cause mechanical failure. In equipment such as cooling fans, that failure can contribute to wider maintenance and uptime problems.

Bearing specification should therefore form part of reliability planning rather than treated solely as a purchasing decision.

The commercial impact of downtime reinforces this approach. Uptime Intelligence’s 2026 Annual Outage Analysis found that 57% of respondents to its 2025 annual survey said their most recent major outage cost more than $100,000, while one in five said their most recent impactful outage cost more than $1 million.

Selecting bearings according to operating speed, load, temperature, contamination risk, lubrication life and maintenance accessibility can help identify potential problems during the design stage. Considering these factors alongside uptime targets and service intervals makes bearing selection part of a wider reliability strategy.

As datacentres become more automated, reliability needs consideration across every part of the equipment on which they depend. Bearings may be small components, but their specification can have a significant impact on equipment performance. Selecting the right bearing for each application can help operators reduce avoidable maintenance, support increasingly automated infrastructure and keep critical equipment running.

Want to know more about this article?
Ask us below...

This field is for validation purposes and should be left unchanged.